# 250 Mach 1 toolboxes

**URL:** https://forum.docgb.org/t/250-mach-1-toolboxes/2125
**Category:** Singles
**Created:** [September 10, 2017, 5:20pm UTC](https://forum.docgb.org/t/250-mach-1-toolboxes/2125 "2017-09-10T17:20:39Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![peteholt](https://forum.docgb.org/letter_avatar_proxy/v4/letter/p/b5e925/32.png) [@peteholt](https://forum.docgb.org/u/peteholt)
#### Post date: [September 10, 2017, 5:20pm UTC](https://forum.docgb.org/t/250-mach-1-toolboxes/2125/1 "2017-09-10T17:20:39Z")

</div>

Hello,

I have acquired a 250 Mach 1 but it doesn’t have the original toolboxes fitted. I have managed to obtain a pair of 2nd hand toolboxes but cannot fathom out how the fit to the frame. Could anyone offer some advise on how they attach to the frame and any photos would be greatly appreciated.

Regards Pete

---

<div class="post-metadata">

### Author: ![Mach1Mike](https://forum.docgb.org/letter_avatar_proxy/v4/letter/m/bc8723/32.png) [@Mach1Mike](https://forum.docgb.org/u/Mach1Mike)
#### Post date: [April 24, 2018, 4:05pm UTC](https://forum.docgb.org/t/250-mach-1-toolboxes/2125/2 "2018-04-24T16:05:47Z")

</div>

Hello Pete,  
did you get a response to this or work out how they attach? If not happy to take some pictures of mine & I have a workshop manual, so if its in there, happy to copy the pages?  
Regards,  
Mike.