# Monster 695 Shock Tie Rod

**URL:** <https://forum.docgb.org/t/monster-695-shock-tie-rod/5437>\
**Category:** 2 Valve Belt Drives\
**Created:** [November 8, 2020, 4:35pm UTC](https://forum.docgb.org/t/monster-695-shock-tie-rod/5437 "2020-11-08T16:35:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Spaggy](https://forum.docgb.org/user_avatar/forum.docgb.org/spaggy/32/9_2.png) [@Spaggy](https://forum.docgb.org/u/Spaggy)\
**Post date:** [November 8, 2020, 4:35pm UTC](https://forum.docgb.org/t/monster-695-shock-tie-rod/5437/1 "2020-11-08T16:35:39Z")

</div>

My 695 has a threaded, adjustable rear shock linkage tie rod.  
It just passed the MOT but got an advisory on worn linkage joints.  
When looking at replacing either the joints or the complete rod, I found a second hand tie rod on eBay for less than the cost of one new ball joint. However, before dismantling it I looked closer, and the rod I bought matches pics in the parts book, and is non-adjustable.  
So…any ideas where mine comes from. See pics. Is it a later deveopment? Or off of something else? After-market maybe? Any ideas please?  
 ![Linkage%20(Small)](https://forum.docgb.org/uploads/default/original/1X/01db4b7aa8d3823705538a64467e2a8b2640b70f.jpeg) ![Linkage%202%20(Small)](https://forum.docgb.org/uploads/default/original/1X/eaec27337e863a99d3e7f83b6e918461957f9ded.jpeg)

---

<div class="post-metadata">

**Author:** ![Spaggy](https://forum.docgb.org/user_avatar/forum.docgb.org/spaggy/32/9_2.png) [@Spaggy](https://forum.docgb.org/u/Spaggy)\
**Post date:** [November 10, 2020, 12:58am UTC](https://forum.docgb.org/t/monster-695-shock-tie-rod/5437/2 "2020-11-10T00:58:00Z")

</div>

Looks like I might have found the answer.  
The S2R and S4R use an adjustable tie-rod, so I think it might be off of one of them.
