Ducati 916 Strada Ohlins rear shock settings?

Technical Help 4 Valve Belt Drives
#1

Hi folks,

Any one have any recommended std settings for Ohlins rear shock, road use.

Thanks
:smiley:

#2

Hope this helps, but youve probably sorted it by now :smiley:

Ducati ‘95 916 Strada Suspension*& Chassis Setup

TYRE PRESSURE

Front/Rear: 32.5/36psi

FRONT DAMPING (Showa Forks)

Compression Damping (turn screws at bottom of fork clockwise till stop, then)

12 clicks counterclockwise

Rebound Damping (turn screws at top of fork clockwise till stop, then)

10 clicks counterclockwise

PRELOAD

Front Spring Preload (22mm wrench at top of fork)

0.78in (20mm) - 3rd notch from the top showing)

Rear Spring Preload

0.78in (20mm) of thread above top lock ring showing

REAR DAMPING (Ohlins)

Compression Damping
Turn resevoir (marked) knob clockwise to increase damping till stop, then

14 clicks counterclockwise

Rebound Damping (dial on bottom of spring)
Kneeling at left side of bike, turn the knob counterclockwise to increase damping till stop, then

14 clicks clockwise